Metal bunk bed – A futon bunk bed differs from a regular bunk in that mattresses need more support. Where a standard berth provides rails to hold a box spring, a futon bunk bed uses a solid or grid platform. Although each brand and model of futon metal bunk bed will have its own idiosyncrasies, the method of the general assembly remains the same. You can put together a futon bed metal bunk beds alone, but it is much easier to do with a companion.
Adjust the end frames, usually each in one piece, in an upright position, close to where you go to the metal bunk beds ikea when it is in its final position. Slide the bolt of your kit through each hole in the lower half of the end frame. The heads of the screws should point outwards. Maneuvering the mattress platform of the lower berth on the bolts. nuts by hand in hand on each bolt until it is firmly in place.
Repeat steps 2 and 3 with the upper half of the metal bunk beds with storage frame, installing the upper mattress platform. Holding the nuts in place with the tweezers, tighten each screw down with your Allen wrench until the frame no longer wobbles. Keep in mind that some models do not use hexagonal screws and may require different tools, such as a screwdriver wrench or socket.